Stone Veneer Installation Cost in Orange County
Stone veneer installation cost in two frames kept apart: Frame A prints $10 to $45 per square foot installed; Frame B prints $11 to $18, with a total installed reading of $13 to $22.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
Two published frames, named apart and never blended
| Frame | What it prices | 2026 band |
|---|---|---|
| Frame A | stone veneer siding, installed, per square foot | $10-$45 |
| Frame A | partial front of a house, average | $2,000-$9,000 |
| Frame B | stone veneer siding, per square foot | $11-$18 |
| Frame B | total installed cost, per square foot | $13-$22 |
Neither frame folds into the other: Frame A reads the veneer layer per square foot and per application, with project averages beside it; Frame B reads it per square foot and per whole project. The material layer prices on the material guide; the application layer on the application guide.
Frame A lines, as reported
| Frame A line, as published | Reading | 2026 band |
|---|---|---|
| Stone veneer siding installed, in HomeGuide stone-veneer data | per square foot | $10-$45 |
| Cultured or manufactured stone, installed, in the same data | per square foot | $10-$35 |
| Foundation run, in the same data | average, per project | $3,000-$13,500 |
| Fireplace face, in the same data | per square foot | $45-$75 |
Frame A is one printed reading across HomeGuide stone reporting: a headline per-square-foot band, a by-material table inside it, and by-application lines for the front, the foundation, the interior accent wall, the fireplace, and the chimney. Each application prints with its own band on the application guide.
Frame B lines, as reported
| Frame B line, as published | Reading | 2026 band |
|---|---|---|
| Stone veneer siding, in Angi per-project data | per square foot | $11-$18 |
| Total installed cost, in the same data | per square foot | $13-$22 |
| Whole project, in the same data | per 1,000 square feet | $13,000-$22,000 |
| Whole-project national average, in the same data | per 1,000 square feet | $16,000 |
| Mortarless veneer, in the same data | per square foot | $6-$10 |
Frame B prints the same project three ways, each on its own line: a siding rate per square foot, a total installed rate per square foot beside it, and a whole-project band per 1,000 square feet with a national average inside it. Its materials-alone and labor lines price on the material guide.
Quoted apart from fireplace builds and full re-sides
Masonry and siding contractors quote the veneer layer apart from fireplace builds and full siding replacement: per square foot by material, and per application, for front facades, foundations, interior accent walls, and fireplace surrounds. In Orange County the wedge is the county's stucco tract homes, whose owners price a stone front or a stone fireplace face without pricing a whole re-side. The buyer's question is the cost of the veneer area already in place.
The neighbours, differentiated head-on
The nearest borders, named plainly: a fireplace guide prices the fireplace, a siding comparison prices a full re-side -- this cluster prices only the veneer layer. The outdoor fireplace page prices an outdoor fireplace as a fireplace build, veneer named only as a facing component; the stucco vs. siding page prices a stucco vs. siding full replacement comparison, never a veneer layer on its own.
Reading a stone veneer quote
- Frame named on every line
- Per-square-foot lines read apart from whole-project totals
- By-material lines read apart from by-application lines
Frequently asked questions
How much does stone veneer installation cost in Orange County?
Two frames, never blended. Frame A: $10 to $45 per square foot installed. Frame B: $11 to $18 per square foot, total installed $13 to $22 per square foot, and $13,000 to $22,000 per 1,000 square feet.
What does a partial stone front cost, as reported?
Frame A prints a partial front of a house at $2,000 to $9,000 on average, with a 200 square foot half-stone front at $1,300 to $5,000. Frame B prints no partial-front line; its whole-project band is $13,000 to $22,000 per 1,000 square feet.
What is the whole-project line either frame prints, as reported?
Frame B prints it: $13,000 to $22,000 per 1,000 square feet, national average $16,000. Frame A prints project averages per application instead: a foundation at $3,000 to $13,500 on average, and a partial front at $2,000 to $9,000.
Is a stone veneer layer the same purchase as a fireplace build or a full re-side?
No, head-on: a fireplace guide prices the fireplace, and a siding comparison prices a full re-side. A stone veneer layer is priced per square foot, by material, and by application; this hub prices that layer.
Why do the two frames print different bands for the same project?
Frame A reads the layer per square foot and per application, turning on material; Frame B reads it per square foot and per whole project, turning on project size. Each stays on its own frame.