Stone Veneer Cost by Application Guide
The application layer prints apart by frame: Frame A prices five applications, from a partial front at $2,000 to $9,000, while Frame B prices the whole project per 1,000 square feet.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
Applications priced apart in both frames
| Frame | Line, as published | 2026 band |
|---|---|---|
| Frame A | partial front of a house, average | $2,000-$9,000 |
| Frame A | foundation run, average | $3,000-$13,500 |
| Frame A | stone veneer siding installed, per square foot | $10-$45 |
| Frame B | whole project, per 1,000 square feet | $13,000-$22,000 |
Every figure here is a published line inside its own frame and its own layer, never folded into the other. The project whole prices on the stone veneer hub; the material layer on the material guide.
The exterior layer, as reported
| Exterior line, as published | Reading | 2026 band |
|---|---|---|
| Partial front of a house, in HomeGuide stone-veneer data | average, per project | $2,000-$9,000 |
| Half-stone front at 200 square feet, in the same data | per project | $1,300-$5,000 |
| Foundation run, in the same data | average, per project | $3,000-$13,500 |
Exterior pricing prints on Frame A as project averages, not per-foot bands: the partial front and the foundation each carry an average with a wide spread. The half-stone line is the one sized exterior reading -- a 200 square foot front, printed with its area beside its band.
The interior and fireplace layer, as reported
| Interior line, as published | Reading | 2026 band |
|---|---|---|
| Interior accent wall, in HomeGuide stone-veneer data | per square foot | $10-$45 |
| Interior accent wall, in the same data | per project | $1,000-$4,500 |
| Fireplace face, in the same data | per square foot | $45-$75 |
| Fireplace face, in the same data | per project | $1,300-$5,000 |
| Chimney face, in the same data | per square foot | $15-$60 |
| Chimney face, in the same data | per project | $1,000-$6,000 |
Three applications print two ways each on Frame A: the accent wall, the fireplace face, and the chimney face each carry a per-square-foot band and a per-project band, printed as separate lines. The fireplace per-foot band is the highest per-foot reading in either frame; the accent wall per-foot band matches the headline band exactly.
Frame B application reading, as reported
| Frame B line, as published | Reading | 2026 band |
|---|---|---|
| Whole project, in Angi per-project data | per 1,000 square feet | $13,000-$22,000 |
| Whole-project national average, in the same data | per 1,000 square feet | $16,000 |
| Total installed cost, in the same data | per square foot | $13-$22 |
| Per-application line in Frame B | per application | no line printed |
Frame B prints no application split of its own: no front, foundation, accent, fireplace, or chimney line appears in its reading. Its answer to the application question is a whole-project band per 1,000 square feet and a total installed rate per square foot, each printed whole.
Reading the application layer, by frame
Frame A answers with applications: five named placements, three of them priced per foot and per project both. Frame B answers with the whole project. An application quote names its placement in its first line.
- Placement named beside every band: front, foundation, accent, fireplace, or chimney
- Per-foot bands and per-project averages never converted into each other
- Whole-project totals read apart from single-application averages
Frequently asked questions
How much does a stone veneer front cost, as published?
Frame A prints a partial front of a house at $2,000 to $9,000 on average, with a 200 square foot half-stone front at $1,300 to $5,000. Frame B prints no front line; its whole-project band is $13,000 to $22,000 per 1,000 square feet.
What does a stone veneer fireplace face cost, as reported?
Frame A prints the fireplace face two ways: $45 to $75 per square foot, and $1,300 to $5,000 per project. The chimney face prints at $15 to $60 per square foot and $1,000 to $6,000 per project in the same data.
What does an interior accent wall cost, as reported?
Frame A prints an interior accent wall at $10 to $45 per square foot and $1,000 to $4,500 per project. Frame B prints no accent wall line; its readings are per square foot for the project as a whole and per 1,000 square feet.
How does Frame B price the application layer, as reported?
It does not split it: Frame B prints a whole project at $13,000 to $22,000 per 1,000 square feet, national average $16,000, and a total installed rate at $13 to $22 per square foot, with no per-application line.
Can a per-project average and a per-foot band be combined into one application price?
No. Frame A's per-project averages price whole placements; its per-foot bands price area. The frames and their readings are never blended, and neither reading is converted into the other.