Wheelchair Ramp Cost by Type Guide

The single installation priced by ramp type: permanent, modular, and portable rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data — not a quote. Two published frames are named apart and never blended: Frame A (the Angi frame) counts a ramp installation by ramp type; Frame B (the HomeAdvisor frame) counts the installation per linear foot. Always get 3 written quotes.

The type readings, priced apart by frame

Type readingFrame A readingFrame B reading
Modular ramp$1,500-$4,000 type row$440-$5,500 type row
Permanent ramp$2,000-$5,500 type row$1,100-$6,600 type row
Project overall$2,285 Frame A average$2,292 Frame B average

Each reading is one frame's own counting of one ramp type: a type row counts the named ramp form with its material lines inside it, and type rows are never blended across types or frames.

The type rows, priced apart

Type rowFrame A readingFrame B reading
Permanent / custom$2,000-$5,500 / $3,000-$7,500$1,100-$6,600 / in type frame
Modular / semi-permanent$1,500-$4,000 / in type frame$440-$5,500 / $385-$2,200
Portable / mini$100-$1,500 / in type frame$110-$2,200 / $110-$220
Threshold$50-$500in type frame

Frame A prints five type rows as its own table; Frame B prints its own five type rows beside them, and a row with no printed line in one frame stands as in that frame, never filled from the other frame.

The material lines, printed inside the type rows

Material line, as publishedFrame2026 reading
Rubber / prefabricated aluminumFrame B$55-$165 / $110-$165 per linear foot
Aluminum / compositeFrame B$165-$220 per linear foot
WoodFrame B$110-$275 per linear foot
Concrete / steelFrame B$220-$275 per linear foot

The material lines count the same installation by its material alone: Frame B prints one line per material per linear foot, and the lines stand inside the type rows as printed, never split into figures of their own. The two frames count the same modular job differently -- Frame A reads a modular ramp at $1,500-$4,000 as a type row with an average project at $2,285, while Frame B counts the installed project per linear foot at $55-$275 and averages $2,292. That difference is named as a frame difference on every page here, never averaged.

The totals behind the rows, and the neighbours named apart

Behind the rows stand the headline lines: Frame A average project at $2,285 with labor at $50-$120 per linear foot, Frame B average at $2,292 with its built ramp at $2,061. The installation priced by length stands on the by-length guide. Named apart, never a row here: the aging-in-place hub's whole-home modifications table, a whole-home scope and never a single ramp ticket; stairlifts, a chair-on-rail purchase and never a ramp; and doorway widening, a carpentry row and never a ramp run.

Reading a by-type quote, by frame

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data. Your price will vary with ramp type and length as quoted. This guide does not endorse, rate, or recommend any firm or brand. Figures are ranges only, not quotes.

Frequently asked questions

What does wheelchair ramp cost by type, as reported?

Frame A prints permanent at $2,000 to $5,500, modular at $1,500 to $4,000, portable at $100 to $1,500, and threshold at $50 to $500 as type rows. Frame B prints modular at $440 to $5,500 and permanent at $1,100 to $6,600 as its own type rows. A frame difference, never averaged.

What do the material lines print at, as reported?

Frame B prints rubber at $55 to $165, prefabricated aluminum at $110 to $165, aluminum at $165 to $220, and concrete at $220 to $275 per linear foot as material lines. Frame A prints no material lines, apart.

What do the small-ramp rows print at, as reported?

Frame A counts by ramp type, standing apart: portable at $100 to $1,500 and threshold at $50 to $500. Frame B prints mini at $110 to $220, portable at $110 to $2,200, and semi-permanent at $385 to $2,200 beside them.

What does the custom row print at, as reported?

Frame A prints custom at $3,000 to $7,500 as its own type row, its average project at $2,285 beside it. Frame B stands in its $2,292 average and its type rows, apart.

Is a type row the same purchase as a whole-home modification or a stairlift?

No. Each row prices one ramp type in one installation, off a $2,285 average in Frame A and a $2,292 average in Frame B. The whole-home hub table, stairlifts, and doorway widening sit in their own lanes, named apart.

Related guides