Shiplap Cost by Room and Material Guide
The room-and-material layer prints apart by frame: Frame B prices each room as its own project band, from $240 to $12,100, while the material lines print per square foot on both frames.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The room-and-material layer, priced apart
| Frame | Line, as published | 2026 band |
|---|---|---|
| Frame A | shiplap, per square foot | $2.50-$7 |
| Frame B | shiplap walls or ceilings, installed per square foot | $3-$11 |
| Frame B | shiplap boards and materials, per square foot | $2-$7 |
Every figure here is a published line inside its own frame, never averaged into a single band. Room size is the first attribute a shiplap quote names, board material the second. The project whole prices on the shiplap hub; the ceiling-and-siding layer on the ceiling and exterior guide.
Frame B room layer, as reported
| Project, as published | Square feet | Average cost installed |
|---|---|---|
| One accent wall | 80-150 | $240-$1,700 |
| Pantry or small bathroom | 150-250 | $450-$2,800 |
| Entire mudroom | 225-400 | $680-$4,400 |
| Entire bedroom or porch | 400-650 | $1,200-$7,200 |
| Entire living room or primary bedroom | 800-1,100 | $2,400-$12,100 |
Frame B prices the room directly: five named projects, each with a square-foot band and an installed band of its own. The accent wall is the per-wall reading; the living room or primary bedroom band is the widest interior reading on the page. The ceiling band and the exterior siding band sit on the same by-project table at HomeGuide and price in full on the ceiling and exterior guide, apart from these interior room lines.
Frame B material layer, as reported
| Frame B line, as published | Reading | 2026 band |
|---|---|---|
| Shiplap boards and materials | per square foot | $2-$7 |
| Installation labor | per square foot | $1-$4 |
| Total installed cost, walls or ceilings | per square foot | $3-$11 |
Frame B prints its material line as a per-square-foot reading inside its installed total: boards and materials on one line, labor on the next, the two never merged into a single figure on this page. A room band is read against the room table above, and a material question against this table; the two readings answer apart.
Frame A material layer, as reported
| Frame A line, as published | Reading | 2026 band |
|---|---|---|
| Shiplap, in the shiplap comparison data | per square foot | $2.50-$7 |
| Shiplap, in the paneling-type table, material printed as wood, MDF | per square foot | $7-$16 |
| Shiplap installation, average, as printed in the comparison data | per project | $1,000 |
Frame A carries two per-square-foot readings of its own: the comparison-data line and the paneling-table line, the second with the board material named in the table itself. Neither is folded into Frame B's materials line, although the comparison line and the materials line print in a similar range; similar is not the same line, and each stays named under its own frame.
Reading room bands against material lines
A room band answers the whole-room question; a material line answers the per-square-foot question inside it. A quote that names only one of the two readings is read against the table it belongs to, and against no other.
- Room name and square feet named beside every project band
- Board material named beside every material line
- Per-square-foot lines read apart from per-room totals
- Each frame's material line read on its own frame only
Frequently asked questions
How much does it cost to shiplap a room, as published?
Frame B prints by project: a pantry or small bathroom at 150 to 250 square feet for $450 to $2,800, an entire mudroom at 225 to 400 for $680 to $4,400, an entire bedroom or porch at 400 to 650 for $1,200 to $7,200, and an entire living room or primary bedroom at 800 to 1,100 for $2,400 to $12,100, each installed.
What material lines do the frames print, as reported?
Frame B prints shiplap boards and materials at $2 to $7 per square foot, with labor at $1 to $4 inside its $3 to $11 installed total. Frame A prints shiplap at $2.50 to $7 per square foot in its comparison data and at $7 to $16 in its paneling-type table. The lines print apart, never blended.
What does one accent wall cost, as published?
Frame B prints one accent wall at 80 to 150 square feet at $240 to $1,700 installed -- the per-wall reading on that frame, and the smallest project band on its by-project table.
Why does the paneling-table line print higher than the comparison line?
They are two printed lines in two Angi tables: the shiplap comparison data reads $2.50 to $7 per square foot, and the wall-paneling guide's paneling-type table reads shiplap at $7 to $16 per square foot with the material named as wood, MDF. Each line is reported as printed, on its own table.
Where do ceiling and exterior projects sit in the room-and-material layer?
Nowhere on this page: one ceiling and the exterior siding project are the ceiling-and-siding layer, priced on the ceiling and exterior guide. This guide prices interior room bands and board-material lines only.