Relocate Washer-Dryer Hookups Cost Guide
Moving laundry to a new spot is its own purchase, priced apart from creating hookups in a home that never had them and apart from connecting machines where hookups already exist. Angi 2026 relocation reporting averages $1,200, approaching $5,000 with new venting and drain work. HomeGuide 2026 data names a separate new-hookup labor band. This guide prices the move frame by frame.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The relocation total, inside the Angi relocation frame
| Relocation line | Cost, Angi 2026 | Frame note |
|---|---|---|
| Relocation, average | $1,200 | headline average |
| Relocation with new venting and drain work | approaching $5,000 | upper reported reach |
| Appliance installation, per unit | $50-$175 | machine line only |
Read the average as one frame's relocation headline, never as a blended moving price. The Angi relocation frame, updated March 18, 2026, states an average of $1,200 and names distance to the existing supply, drain, and power lines as the driver that pushes a move toward $5,000 when new venting and drain work join the project. The per-unit appliance line, $50 to $175, prices the machines at the end of the move; it is not a hookup line. Creating hookups in a space with no laundry history prices on the washer-dryer hookup installation cost hub.
Relocation component lines, as reported cost lines only
| Component line | Cost, Angi relocation frame |
|---|---|
| New drain line | $360-$1,840 |
| New outlets and circuits, each | $100-$500 |
| New gas line | $200-$5,000 |
| New dryer vent | $100-$1,000 |
| Drywall repair | $300-$1,000 |
Published relocation reporting breaks the move into component lines, and this guide carries them as cost lines only: a drain line, outlet and circuit lines, a gas line where the new spot serves a gas dryer, a vent line, and a drywall repair line where the old and new spots are opened and closed. The gas line band is the widest in the table, $200 to $5,000, and it is a reported price band only: nothing here describes gas work of any kind. The vent line in this table prices a new vent as part of a relocation project; the vent duct run as a standalone project prices on its own dryer-vent guides.
The second frame, named separate and never blended
The HomeGuide frame prices the same territory from a different starting point, and this guide keeps it apart. HomeGuide names labor of $650 to $2,000 for installing new utility hookups where none existed, a band that can describe the new-spot side of a relocation without being a relocation total. Its other lines stand apart as well: installation at $100 to $300 per set with existing hookups, a new set at $1,000 to $2,300 for the units only, and a total of $1,100 to $2,600 with existing hookups. No HomeGuide line is averaged with any Angi relocation line, and a relocation quote should name which frame each of its lines follows.
What moves the relocation total, as reported drivers only
Published reporting names the drivers in plain terms, and this guide repeats them as reported drivers only. Distance comes first: a new spot near the existing lines prices apart from a spot across the house or on another floor. The drain line comes second, at $360 to $1,840 in the relocation frame, because the new spot stands or falls on that line existing there. Venting and drywall repair follow, and the fuel decision rides along: a gas dryer at the new spot carries the gas line band above, while the electric side prices on the electric vs. gas dryer hookup cost guide. The room the laundry leaves and enters is a separate purchase again, priced on the laundry-room remodel guides.
- Frame named per line: Angi relocation or HomeGuide
- Distance to existing lines stated on the quote
- Drain, outlet, gas, vent, and drywall lines shown apart
- Per-unit machine line shown apart from hookup lines
- Relocation priced apart from hookup creation and remodel work
Frequently asked questions
How much does it cost to relocate washer and dryer hookups?
Angi relocation frame: an average of $1,200, approaching $5,000 with new venting and drain work. HomeGuide frame, named separate: labor of $650 to $2,000 for new utility hookups where none existed. The frames are kept apart, never blended.
What does a new drain line cost in a relocation?
Angi relocation frame: $360 to $1,840 for a new drain line. The same frame prices new outlets and circuits at $100 to $500 each and drywall repair at $300 to $1,000. Each line belongs to the relocation frame alone.
What does a new gas line add to a laundry relocation, as reported?
Reported cost lines only: the Angi relocation frame prices a new gas line at $200 to $5,000, the widest band in the relocation table. This guide carries that band as a price line only and describes no gas work of any kind.
What does the vent line cost when laundry moves?
Angi relocation frame: a new dryer vent at $100 to $1,000 as part of a relocation project. A vent duct run priced as a standalone project sits on the dryer-vent guides, a separate lane from relocation pricing.
Is relocating hookups the same purchase as the room work around them?
No: this guide prices the hookup lines of the move, drain, power, venting, and drywall repair lines included. The laundry-room remodel guides price the room itself, and the hub prices creating hookups where none exist. Three purchases, three tables.