Ice Maker Repair Cost by Part Guide

The repair visit priced by failed part: valve, mold, board, sensor, and motor rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data — not a quote. Two published frames are named apart and never blended: Frame A (the Angi frame) counts an ice maker repair visit by repair type; Frame B (the HomeGuide frame) counts the visit by part. Always get 3 written quotes.

The part readings, priced apart by frame

Part readingFrame A readingFrame B reading
Water inlet valve$90-$225 type row$100-$225 part row
Motor$120-$400 gear band$225-$400 part row
Visit overallrows priced apart$100-$225 repair average

Each reading is one frame's own counting of one failed part: a part row counts the named part alone inside one repair visit, and per-part rows are never blended into the refrigerator guide's headline band.

The part rows, priced apart

Part rowFrame A readingFrame B reading
Ice mold or tray$80-$150in average line
Control board$150-$300in average line
Thermostat or sensor$100-$250in average line
Repair average, apartrows priced apart$100-$225

Frame A prints its type rows as their own lines; Frame B prints its own part rows beside them, and a row with no printed line in one frame stands as in that frame, never filled from the other frame.

The water-line and filter rows, priced apart

Part line, as publishedFrame2026 reading
Clogged water line or leakFrame A$70-$200
Water line and fill tubeFrame B$100-$200
Drive bladeFrame B$80-$150
Water filterFrame B$90-$190

The water-line rows count a line reading inside the repair visit alone: a line run to a unit is the water-line cluster's own field, named apart, and no row here prices a run. The two frames count the same motor job differently -- Frame A reads motor or gear repair at $120-$400 as one band, while Frame B reads a motor row at $225-$400 as its own by-part row. That difference is named as a frame difference on every page here, never averaged.

The totals behind the rows, and the neighbours named apart

Behind the rows stand the headline lines: Frame A type rows from an $80-$150 mold row to a $120-$400 motor band, Frame B part rows from an $80-$150 blade row to a $225-$400 motor row. The repair ticket against the replacement ticket prices apart on the repair-vs-replacement guide. Named apart, never a row here: the whole-refrigerator ticket, the refrigerator guide's own field with its $150-$300 ice maker band standing inside a whole-refrigerator ticket and never a row here; the water-line installation run, the standing water-line cluster's own field; and standalone and countertop ice machines, a unit purchase and never a repair visit.

Reading a by-part quote, by frame

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data. Your price will vary with the failed part and the unit type as quoted. This guide does not endorse, rate, or recommend any firm or brand. Figures are ranges only, not quotes.

Frequently asked questions

What does ice maker repair cost by part, as reported?

Frame A prints a water inlet valve at $90 to $225, an ice mold or tray at $80 to $150, and a control board at $150 to $300 as type rows. Frame B prints a water inlet valve at $100 to $225 and a motor at $225 to $400 as part rows. A frame difference, never averaged.

What do the water-line rows print at, as reported?

Frame A prints a clogged water line or leak at $70 to $200 as a type row. Frame B prints a water line and fill tube at $100 to $200 as a part row. A line run stands in the water-line cluster's own field, apart.

What does the motor row print at, as reported?

Frame B counts by part, standing apart: a motor row at $225 to $400, its drive blade at $80 to $150 and its water filter at $90 to $190 beside it. Frame A stands in its motor or gear band at $120 to $400, apart.

What does the visit total print at behind the rows, as reported?

Frame B prints a repair average at $100 to $225 beside its rows. Frame A prints no single visit total on its type table, its rows priced apart in its own frame.

Is a part row the same purchase as a refrigerator repair or a water-line run?

No. Each row prices one failed part in one repair visit, off a $225 to $400 motor row in Frame B and a $90 to $225 valve row in Frame A. The whole-refrigerator ticket, the water-line installation run, and standalone and countertop ice machines sit in their own lanes, named apart.

Related guides