Fireplace Repair Cost by Part Guide

Fireplace repair cost by part, rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by firm and scope

Reading this guide: every figure below is a range from published pricing data — not a quote. Two frames are named apart and never blended: Frame A (the Angi frame) and Frame B (the HomeAdvisor frame). The frames count the same job differently; that difference is named on every page. Always get 3 written quotes.

Part readings, Frame A

Part row, Frame AReadingFrame A note
Firebox$160-$2,500part row
Refractory panel$200-$300single panel row
Hearth$150-$800part row
Mantel$500-$1,200part row
Pilot light$100-$350part row
Igniter$100-$150part row
Gas valve$150-$300part row
Thermocouple$75-$350part row
Thermopile$75-$350table row; its prose line prints $75-$375 apart

Each reading is one part row, stated as printed in Frame A. Frame A detail lines: an annual inspection at $75-$125; a steel insert firebox at $160-$750 inside the firebox row; firebox repointing at $4-$25 per sq ft and brick replacement at $34-$40 per sq ft; a flue line at $200-$5,000 in prose with a liner average at $2,500; a minor mortar line at $30-$60; and a chimney sweep line at $255, each as printed apart.

Part readings, Frame B

Part row, Frame BReadingFrame B note
Firebox$160-$2,500part row, same reading as Frame A
Panel$200-$300part row, same reading as Frame A
Mantel$500-$1,200part row, same reading as Frame A
Flue$200-$5,000part row; Frame A carries the flue in prose

Frame B prints four part rows. Not itemized in Frame B as printed: a hearth line, a pilot light line, an igniter line, a gas valve line, a thermocouple line, and a thermopile line carry no printed Frame B part reading; Frame A prints each of those rows apart, and the absence stands as printed, never filled from Frame A.

Part against part, frame against frame

A firebox stands at $160-$2,500 in both frames while a refractory panel stands at $200-$300 and an igniter at $100-$150 in Frame A -- readings of one visit, priced apart by part. The mantel stands at $500-$1,200 in both frames and the hearth at $150-$800 in Frame A alone, each apart. The frames price the same visit apart -- Frame A prints nine part rows, hearth and the five gas-side rows among them, and carries its flue line in prose at $200-$5,000; Frame B prints four part rows with the flue standing as a part row at $200-$5,000, and prints repointing and sweeping lines Frame A carries only in part; both frames print the average at $613 and most projects at $185-$1,050 by coincidence of source, named apart -- a frame difference, never averaged, never blended.

The neighbours named apart

Named apart, never a row here: fireplace insert installation, a new insert fitted as a different job; fireplace chimney maintenance, a standing maintenance page with one incidental repair mention; outdoor fireplace, an outdoor build; and the chimney repair cluster, the stack priced as its own cluster -- this cluster prices fireplace repair, the repair visit alone, never a new insert, never a maintenance read, and never the stack.

The local read

The local read: the frames above are national published frames; a written quote for one address and one part line is the only local figure.

Reading a quote

Cost guide, not advice: ranges compiled from published pricing data; your price varies with the part, the problem, and the firm as quoted. No firm, brand, or product is endorsed, rated, or recommended here. Ranges only, not quotes.

Frequently asked questions

What does fireplace repair cost by part, as reported?

Frame A prints a firebox at $160 to $2,500, a refractory panel at $200 to $300, a hearth at $150 to $800, a mantel at $500 to $1,200, a pilot light at $100 to $350, an igniter at $100 to $150, a gas valve at $150 to $300, a thermocouple at $75 to $350, and a thermopile at $75 to $350. Frame B prints a firebox, a panel, a mantel, and a flue row only, each apart.

What do the shared part rows print at, as reported?

The firebox row prints at $160 to $2,500, the panel row at $200 to $300, and the mantel row at $500 to $1,200 in both frames, each at the same reading and stated as a coincidence of source, frames separate.

Are the gas-side part rows priced in both frames?

No. Frame B itemizes no pilot light, igniter, gas valve, thermocouple, or thermopile row as printed; Frame A prints each of those rows apart, and the absence stands as printed, never filled from Frame A.

What does the flue row print at, as reported?

Frame B prints the flue as a part row at $200 to $5,000. Frame A carries the same flue reading in prose at $200 to $5,000 with a liner average at $2,500, named apart.

Is installation priced on this guide?

No. Fireplace insert installation, fireplace chimney maintenance, outdoor fireplace, and the chimney repair cluster stand in their own lanes, named apart and never rebuilt here. This guide prices repair by fireplace part.

Related guides